How to install and set up the LED panel display?

Hi everyone. The following video explains how you can install the LED panel display in an easy way. It’s a fun project. So why wait, follow these simple steps and you will be a pro in no time. Let’s get started. 

LED Panel Display Installation:

Location of the led panel, yes this very simple thing you first need to do. It is a garbage-free, neat spot. Select an empty area To get you started, use a measuring tape to measure where the display should go after finding the perfect spot. After you measure, use your pencil to mark off where that display will be mounted. That way you know where everything needs to go. 

Now you will need to install the mounting brackets on your wall. To do this, you will need screws. Also, Take proper wall plugs and screws to keep tight everything. Lift the led panel display and place on brackets after you have hung them with wall. Position it correctly and then use a few screws that came with your display to anchor the sucker in place. Ensure it is strong and secure. 

Workspace Preparation for Installation 

So let's prepare your workspace now before beginning the installation. Thus you must clear the surface on what area which are suppose to be worked upon. Remove any furniture or objects that you may run into. You need as many free spaces around you in which to work efficiently. We can also look at lighting and room temperature. It will make the installation process more difficult if it is a very hot and humid day. Therefore, look for a room that is cold and well-lit. 

Tools You Will Need:  

For a successful installation of your LED panel display, you will need some essential tools. All these sorts of Led panels tools you could pick up from your local hardware store. Tools you will need for this are a drill, screwdriver, leveler, tape measure and pencil along with wall hangers. Collect all tools before starting work This way, you do not have to put down your tools in the middle of a project as well. 

HOW TO CONNECT YOUR LED PANEL DISPLAY:

After you have securely placed your LED Panel Display on the wall, next you will need to connect it a power supply so that It works properly. You can do this simply by plugging it directly into an electrical outlet. Extending too far from a power outlet, use an extension cord to reach. Before you start, make sure that the power supply is compatible with your display according to the manual provided by it. This is very important. 

Secondly, you have to connect the LED panel Display with your computer or other device. Traditionally this has been done using an HDMI cable or a VGA cable. Also make sure you check if your 3d led panels display needs a DisplayPort or HDMI connection. As well, you might have to tweak settings on your computer as it sees the display properly. This step is the necessary evil that allows all of this to tie in together so smoothly. 

Last but not least, once everything is wired up you will want to control your LED panel display using the remote that comes with it. You can easily adjust the brightness and contrast of the display by menu settings with this remote. You can resize your image in addition to altering the resolution and other settings so that you get a higher quality picture at last. Don't hurry, do it all in peace. 

Tips for Troubleshooting:

Don't worry if you experience any issues when installing or configuring your LED panel display. Below are some of the techniques you can use to address issues as they arise: 

If it is difficult to install on the wall, you may want to try using a different kind of screw or anchor. Little changes, big results. 

Adjust the brightness or resolution settings if your LED panel display is not displaying image properly. These changes usually rectify any sort of displays issue you have. 

If you are unable to connect your LED panel display with the computer, try using a different cable or restart the computer. This may help to re-establish the connection.