the high brightness, low attenuation, high reliability, good consistency, strong ability to adapt to the environment;
the module mask protect the whole the screen body to dustproof, sunburn protection, anti-collision directly with the LED chip, and extend the chips lifetime. Module PCB surface coating formoisture-proof, waterproof, anti-corrosion; multi-layer circuit board design,the current distribution more uniformity, power consumption lower, heat dissipation faster, extending the screen life effectively. Circuit protection with anti-jamming and black screen makes the screen more perfect;
High strength reinforcement kits and modules Bottom chute design let the stronger and better smoothness.
Breaking the traditional outdoor full color three lights discrete design, 3 in1 lamp makes the display more uniform mixing.
The box is made of die-casting aluminum molding, CNC computer gongs finishing, high strength, high toughness, high precision, not easy to deformation;
The box around the connection using a fast locking mechanism, a handle is rotated 130 degrees to lock the two box, 10s can complete a box
The body of the installation, high installation accuracy. The splicing and connecting fast, reliable, namely beautiful beautiful and can realize fast and real sense;
Thermal design and thermal performance, excellent, without external fan, air conditioning, low noise; body weight, installation costs low; the low power consumption, saving operation;
Adopt special automobile waterproof tape behind waterproof, waterproof grade can reach IP65/IP54;
Design line inside the box with the reasonable ring, the inner line more concise, beautiful.
P10 DIP570 RGB 3in1 full color outdoor diecast display
Screen Technical parameters
encapsulation of led
Cabinets Display Resolution
1R1G1B DIP 3in1
1/4 scan constant current
Diecast cabinets size
Module quantity per cabinet
Weight of a cabinet
brightness of white balance
Adjustable brightness grade
0-100% 0-255 grade
operating power source
Max 700W / AV350W
Working environment temperature
-20 ~ +60
10-95% Relative humidity
Out of control rate
Front IP65, back IP54
Gray level correction
The output circuit support
The composite interface, S-Video, component, VGA, DVI, HDMI, high-definition standard data interface
cable ≤ 120m ,Optical fiber≥120m
Video graphics matrix support
1024x768 , 1280x1024, 1600x1200, 1920x1280
Pixels, modules, cabinets
First,open/offthe LED display screen Note:
1, switching sequence:Peacock: first boot, after opening screen. Off screen time: first off screen, after shutdown (first turn the computer off screen, will cause the screen body,The high bright, burning lamp, with serious consequences.)
2, open/offer screen time interval must be longer than five minutes.
3, only after the computer control software into the project, the opening screen is energized.
4, avoid opening screen at white brightness state,
5, avoid open screen at uncontrolled state
A, the computer does not enter the control software and other procedures;
B, the computer is not powered;
C, the control section power is not turned on.
6, the ambient temperature is too high or bad cooling conditions, you should be careful not to open the
screen for a long time.
7, if there are some lines display very bright, you should pay attention to off-screen timely.
8, display power often switch trip, should be checked in the screen body or replace the power switch.
9,regular inspection securely attached at the situation. If loosening, pay attention to adjust timely and re-hanging pieces of reinforcement or update.
10, the big display screen and the control part , should avoid insect bites, if necessary, place anti-poison inside.
7* The control part of the change, Note:
1, the live wire ,neutral wire can not reverse, should be plug according to original position strictly.
2, after removed computer and other control devices, you should check connection cable, the control panel without loosening before open the system. 3, can not tamper with communication lines, flat connection line position, length. 4, if found electrical short-circuit , burning, smoke and other abnormalities, should stop power test, and find the problem promptly.
8*The software operation Caution: 1, software backup: WIN2003, WINXP, applications, software installation program database. Recommends using "a key to restore" software, easy to operate. 2, master installation methods, raw data recovery, backup. 3, master control parameter settings, modifications to the underlying data preset 4, skilled use of programs, operating and editing. 5, regularly check for viruses, remove extraneous data 6, the non-full-time staff, do not operate software system
Hot Tags: shenzhen factory energy saving led dispaly dip fixed p10 led screen manufacturers, suppliers, wholesale, made in China